Unifi Access Custom Integration for Home Assistant

• This is a basic integration of Unifi Access in Home Assistant.
• If you have Unifi Access set up with UID this will likely NOT work although some people have reported success using the free version of UID.
• Camera Feeds are currently not offered by the API and therefore NOT supported.

Supported hardware

• Unifi Access Hub (UAH) ✅
• Unifi Access Hub (UAH-DOOR) ✅
• Unifi Access Intercom (UA-Intercom) ❌ (partial/experimental support)
• Unifi Access Hub Enterprise (UAH-Ent) ❌ (partial/experimental support)
• Unifi Gate Hub (UGT) ❌ (partial/experimental support)
• Unifi Access Ultra ❌ (partial/experimental support)

Getting Unifi Access API Token

• Log in to Unifi Access and Click on Security -> Advanced -> API Token
• Create a new token and pick all permissions (this is IMPORTANT). At the very least pick: Space, Device and System Log.

Installation (HACS)

• Add this repository as a custom repository in HACS and install the integration.
• Restart Home Assistant
• Add new Integration -> Unifi Access
• Enter your Unifi Access controller IP or Hostname (default is unifi or UDMPRO). No need to enter port or scheme
• Enter your API Token that you generated in Unifi Access
• Select Verify SSL certificate only if you have a valid SSL certificate. For example: If your Unifi Access API server is behind a reverse proxy. Selecting this will fail otherwise.
• Select Use polling if your Unifi Access version is < 1.90. Default is to use websockets for instantaneous updates and more features.
• It should find all of your doors and add the following entities for each one
  • Door Position Sensor (binary_sensor). If you don't have one connected, it will always be off (closed).
  • Doorbell Pressed (binary_sensor). Requires Unifi Access Reader Pro G1/G2 otherwise always off. Only appears when Use polling is not selected!
  • Door Lock (lock). This will not show up immediately under the device but it should show up after a while. You can unlock (but not lock) a door
  • Event entities: Access and Doorbell Press

Installation (manual)

• Clone this repository
• Copy the custom_components/unifi_access to your config/custom_components folder in Home Assistant.
• Restart Home Assistant
• Add new Integration -> Unifi Access
• Enter your Unifi Access controller IP or Hostname (default is unifi or UDMPRO). No need to enter port
• Enter your API Token that you generated in Unifi Access
• Select Verify SSL certificate only if you have a valid SSL certificate. For example: If your Unifi Access API server is behind a reverse proxy. Selecting this will fail otherwise.
• Select Use polling if your Unifi Access version is < 1.90. Default is to use websockets for instantaneous updates and more features.
• It should find all of your doors and add the following entities for each one
  • Door Position Sensor (binary_sensor). If you don't have one connected, it will always be off (closed).
  • Doorbell Pressed (binary_sensor). Requires Unifi Access Reader Pro G1/G2 otherwise always off. Only appears when Use polling is not selected!
  • Door Lock (lock). This will not show up immediately under the device but it should show up after a while. You can unlock (but not lock) a door
  • Event entities: Access and Doorbell Press

Events

This integration currently supports two type of events

Doorbell Press Event

An entity will get created for each door. Every time the doorbell is pressed there will be a unifi_access_doorbell_start event that will be received by this entity with some metadata. The same event will also be fired on the Home Assistant Event Bus. You can listen to it via the Developer Tools. When the doorbell is either answered or canceled there will be a unifi_access_doorbell_stop event.

Event metadata

• door_name
• door_id
• type # unifi_access_doorbell_start or unifi_access_doorbell_stop

Access

An entity will get created for each door. Every time a door is accessed (entry, exit, app, api) there will be a unifi_access_entry or unifi_access_exit event that will be received by this entity with some metadata. The same event will also be fired on the Home Assistant Event Bus. You can listen to it via the Developer Tools.

Event metadata

• door_name
• door_id
• actor # this is the name of the user that accessed the door. If set to N/A that means UNAUTHORIZED ACCESS!
• type # unifi_access_entry or unifi_access_exit

Evacuation/Lockdown

The evacuation (unlock all doors) and lockdown (lock all doors) switches apply to all doors and gates and will sound the alarm no matter which configuration you currently have in your terminal settings. The status will not update currently (known issue).

Door lock rules (only applies to UAH)

The following entities will be created: input_select, input_number and 2 sensor entities (end time and current rule). You are able to select one of the following rules via the input_select:

• keep_lock: door is locked indefinitely
• keep_unlock: door is unlocked indefinitely
• custom: door is unlocked for a given interval (use the input_number to define how long. Default is 10 minutes).
• reset: clear all lock rules
• lock_early: locks the door if it's currently on an unlock schedule.

Example automation

alias: Unlock Front Gate when motion is detected in Entryway
description: ""
trigger:
  - platform: state
    entity_id:
      - binary_sensor.entryway_motion_detected
condition: []
action:
  - service: lock.unlock
    data: {}
    target:
      device_id: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
mode: single

API Limitations

The Unifi Access API does NOT support door locking at the moment. You probably already have it set to automatically lock after a small delay anyway.

Wishlist

• door code via service

Please create an issue if you have a feature request and pull requests are always welcome!