Skip to content

Simple FTP Server and Client for the esp8266/esp32 with LittleFS and SPIFFS support

License

Notifications You must be signed in to change notification settings

charno/FTPClientServer

 
 

Repository files navigation

FTPServer and FTPClient

Simple FTP Server and Client for the esp8266/esp32 with SPIFFS and LittleFS support.

I've modified a FTP Server from arduino/wifi shield to work with the esp8266 and the esp32. This allows you to FTP into your esp8266/esp32 and access/modify files and directories on the FS. SPIFFS's approach to directories is somewhat limited (everything is a file albeit it's name may contain '/'-es). LittleFS (which is not yet available for the esp32) however has full directory support. So with a FTP Server working on SPIFFS there will be no create/modify directory support but with LittleFS there is! The code ist tested it with command line ftp and Filezilla.

The FTP Client is pretty much straight forward. It can upload (put, STOR) a file to a FTP Server or download (get, RETR) a file from a FTP Server. Both ways can be done blocking or non-blocking.

Features

  • Server supports both active and passive mode
  • Client uses passive mode
  • Client/Server both support LittleFS and SPIFFS
  • Server (fully) supports directories with LittleFS
  • Client supports directories with either filesystem since both FS will just auto-create missing Directories when accessing files.

Limitations

  • Server only allows one ftp control and one data connection at a time. You need to setup Filezilla (or other clients) to respect that, i.e. only allow 1 connection. (In FileZilla go to File/Site Manager then select your site. In Transfer Settings, check "Limit number of simultaneous connections" and set the maximum to 1.) This limitation is also the reason why FuseFS based clients (e.g. curlftpfs) seem to work (i.e. listing directories) but will fail on file operations as they try to open a second control connection for that.

  • It does not yet support encryption

Compatibility

This library was tested against the 2.7.1 version of the esp8266 Arduino core library and the 1.0.4 version of the esp32 Arduino core.

Server Usage

Construct an FTPServer

Select the desired FS via the contructor

#include <FTPServer.h>
#include <LittleFS.h>

FTPServer ftpSrv(LittleFS); // construct with LittleFS
// or
FTPServer ftpSrv(SPIFFS);   // construct with SPIFFS if you need to for backward compatibility

Set username/password

ftpSrv.begin("username", "password");

Handle by calling frequently

ftpSrv.handleFTP(); // place this in e.g. loop()

Client Usage

Construct an FTPClient

Select the desired FS via the contructor

#include <FTPClient.h>
#include <LittleFS.h>

FTPClient ftpClient(LittleFS); // construct with LittleFS
// or
FTPClient ftpClient(SPIFFS);   // construct with SPIFFS if you need to for backward compatibility

Provide username, password, server, port...

// struct ServerInfo
// {
//     String login;
//     String password;
//     String servername;
//     uint16_t port;
// };

ServerInfo ftpServerInfo ("username", "password", "server_name_or_ip", 21);
ftpClient.begin(ftpServerInfo);

Transfer a file

ftpClient.transfer("local_file_path", "remote_file_path", FTPClient::FTP_GET);  // get a file blocking
ftpClient.transfer("local_file_path", "remote_file_path", FTPClient::FTP_PUT_NONBLOCKING);  // put a file non-blocking

Handle non-blocking transfers by calling frequently

ftpClient.handleFTP(); // place this in e.g. loop()

Notes

About

Simple FTP Server and Client for the esp8266/esp32 with LittleFS and SPIFFS support

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 100.0%