Skip to content

A tetrahedral mesh generator that does isosurface stuffing with an acute tetrahedral tile.

License

Notifications You must be signed in to change notification settings

PyMesh/quartet

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Quartet
*******

A tetrahedral mesh generator based on Jonathon Shewchuk's isosurface stuffing 
algorithm in combination with the A15 acute tetrahedral tile.

written by:
Robert Bridson (www.cs.ubc.ca/~rbridson)
Crawford Doran (www.crawforddoran.com)
--------------------------------------


Overview
==========

Quartet converts a watertight triangle mesh into a high-quality uniform 
tetrahedral mesh that closely approximates the geometry, up to the curvature 
implied by the specified grid sampling (dx). Optionally, the tetrahedral mesh 
can be warped to match sharp features on the input, and also improved by a 
quality optimization pass.


Building Quartet
=================

1) It may be necessary to edit Makefile.defs in order to ensure that 
   platform-specific variables are set correctly. These include the compiler,
   linker, and all flags associated with them, including libraries.
2) Run 'make depend'
3) Run 'make' and/or 'make release' ('make' is equivalent to 'make debug')


Running Quartet
==================

Quartet is run from the command line with the following syntax:

quartet <input.obj> <dx> <output.tet> [-f <feature.feat>] [-a <angle_threshold>]
[-s <surface.obj>] [-i] [-o]

- <input.obj> is the OBJ file containing the surface to be converted to a 
  tetrahedral mesh.
- <dx> is the grid spacing used in the isosurface stuffing algorithm. The 
  generated tetrahedra will be approximately this size.
- <output.tet> is a path to the file where the resulting tetrahedral mesh will 
  be saved.

The optional flags have the following effects:
-f <features.feat>   -- The given file <features.feat> contains lists of 
                        points and edges indicating sharp corners and ridges 
                        in the input. The output mesh will resolve these 
                        features as well as possible.
-a <angle_threshold> -- Auto-detects sharp features in the input.  Edges with
                        a dihedral angle smaller than <angle_threshold> degrees
                        will be resolved in the output as well as possible.
                        In addition, these features will be written to a file
                        called 'auto.feat' (which can then be fed to the -f 
                        option in future executions).
-s <surface.obj>     -- The boundary of the resulting tetrahedral mesh is
                        written to <surface.obj>.  This is largely for 
                        convenience of visualizing the result.
-i                   -- Intermediate stages of the mesh generation process are
                        saved to disk in files named 'N_*_.tet' where N is the 
                        numbering of the steps.
-o                   -- Perform quality optimization on the resulting 
                        tetrahedral mesh.

Example inputs can be found in the 'meshes' directory.  For the inputs with
sharp features, corresponding .feat files are provided.

Example usages:
quartet dragon.obj 0.01 dragon_01.tet -o -s dragon.obj
quartet fandisk.obj 0.1 fandisk_1.tet -f fandisk.feat
quartet block.obj 0.5 block_5.tet -a 110.0 -o


Running view_tet
==================

We have included an OpenGL viewer application for visualizing resulting tet 
meshes.  The viewer is called view_tet, and can be called with the following 
syntax:

view_tet <input.tet> [-s] [-f <features.feat>] [-p (x|y|z)<cutting-plane-pos>]*
[-w <num_tets>]

Here, <input.tet> is the TET file produced by quartet containing the tet mesh.

The optional flags have the following effects:
-s                            -- Assume that <input.tet> is actually
                                 <input.obj> and read it in as a surface
                                 mesh from an OBJ file.
-f <features.feat>            -- Displays the sharp features in the file
                                 <features.feat> alongside the mesh.
-p (x|y|z)<cutting-plane-pos> -- Specifies a plane to cut the mesh so the
                                 viewer can see "inside" of it.  The plane is
                                 specified by which coordinate axis is its 
                                 normal and its position along that axis.
                                 Multiple planes can be specified with multiple
                                 occurrences of this flag.
-w num_tets                   -- Draw the mesh so that the <num_tets>
                                 worst-quality tetrahedra are highlighted.

Example usages:
view_tet block.tet -p x0.0
view_tet dragon.obj -s
view_tet fandisk.tet -f fandisk.feat -w 10

Once view_tet is running, the viewer can be controlled with the following 
inputs:

Shift+LeftMouseButton   -- Rotate camera
Shift+RightMouseButton  -- Zoom camera
Shift+MiddleMouseButton -- Pan camera



Source Code overview
======================

The following files make up the quartet source:

Utilities / Data Structures:

util.h
 - a bunch of small useful functions

vec.h
 - a convenience wrapper around fixed-length arrays (for vectors in 3D etc.)

array3.h
 - a convenience wrapper around STL vectors to get 3D arrays

sdf.h/cpp
 - a signed-distance-field data structure for working with level sets

read_obj.h/cpp
 - code to read in a Wavefront .OBJ file

trimesh.h/cpp
 - a simple half-edge triangle mesh data structure

tet_mesh.h/cpp
 - an index-based tetrahedral mesh data structure.  Maintains incidence 
   relationships as necessary for fast adjacency queries.

features.h/cpp
 - Data structures representing sharp features of a triangle mesh and 
   aggregations of those features (called FeatureSets)


Meshing Functions:

geometry_queries.h/cpp
 - some simple and not-so-simple geometric operations needed for creating
   signed distance functions from triangle meshes.
   Uses Jonathan Shewchuk's robust geometric predicates code, found in 
   predicates.cpp (http://www.cs.cmu.edu/~quake/robust.html).

make_signed_distance.h/cpp
 - code for robustly creating a fairly accurate signed distance function
   of a watertight triangle mesh, sampled on a regular 3D grid.

make_tet_mesh.h/cpp
 - code to create a quality tetrahedral mesh of the interior of a level set

tet_quality.h/cpp
 - functions for measuring quality of tetrahedra based on various metrics

match_features.h/cpp
 - code to restore desired sharp features onto a tetrahedral mesh

optimize_tet_mesh.h/cpp
 - code to improve the overall quality of a given tetrahedral mesh.  Uses as 
   much data from the meshing step (ie: sdf, sharp features, etc.) as possible.

main.cpp
 - quartet command-line program 


Viewer Application:

gluvi.h/cpp
 - code for creating a simple generic OpenGL viewer application

view_tet.cpp
 - view_tet main code file for viewing tet meshes

About

A tetrahedral mesh generator that does isosurface stuffing with an acute tetrahedral tile.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 98.0%
  • Other 2.0%