Hız ve Jerk ayarları

Cihazdaki hız ve jerk ayarlarında iyileştirme yapıldı.
MelihOzbk · Nov 16, 2019 · c357ab5 · c357ab5
1 parent 003cc58
commit c357ab5
Show file tree

Hide file tree

Showing 2 changed files with 18 additions and 16 deletions.
diff --git a/Ultimaker Cura 4.3/resources/definitions/rigid3d_base.def.json b/Ultimaker Cura 4.3/resources/definitions/rigid3d_base.def.json
@@ -34,20 +34,7 @@
     "overrides": {
 		"machine_name": { "default_value": "Rigid3d Base Printer" },
 
-		"machine_max_feedrate_x": { "value": 200 },
-        "machine_max_feedrate_y": { "value": 200 },
-        "machine_max_feedrate_z": { "value": 20 },
-        "machine_max_feedrate_e": { "value": 50 },
-
-		"machine_max_acceleration_x": { "value": 1000 },
-        "machine_max_acceleration_y": { "value": 1000 },
-        "machine_max_acceleration_z": { "value": 100 },
-        "machine_max_acceleration_e": { "value": 10000 },
-        "machine_acceleration": { "value": 1000 },
-
-        "machine_max_jerk_xy": { "value": 10.0 },
-        "machine_max_jerk_z": { "value": 0.3 },
-        "machine_max_jerk_e": { "value": 5.0 },
+
 
 		"machine_heated_bed": { "default_value": true },
 
@@ -68,7 +55,7 @@
 		"speed_print": { "value": 40.0 } ,
         "speed_infill": { "value": "speed_print" },
         "speed_wall": { "value": "speed_print" },
-        "speed_wall_0": { "value": "speed_wall * 0.7" },
+        "speed_wall_0": { "value": "speed_wall" },
         "speed_wall_x": { "value": "speed_wall" },
         "speed_topbottom": { "value": "speed_print" },
         "speed_roofing": { "value": "speed_topbottom" },

diff --git a/Ultimaker Cura 4.3/resources/definitions/rigid3d_zero2.def.json b/Ultimaker Cura 4.3/resources/definitions/rigid3d_zero2.def.json
@@ -6,8 +6,23 @@
 
     "overrides": {
         "machine_name": { "default_value": "Rigid3d Zero 2" },
-		"machine_start_gcode": {"default_value": "G21\nG28 ; Home extruder\nM420 S1 ; Enable MBL\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X30 Y30 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"},
+		"machine_start_gcode": {"default_value": "M203 X1000.00 Y1000.00 Z3.00 E40.00 ;Setup machine max feedrate\n\nM205 X8.00 Y8.00 Z0.30 E5.00 ;Setup Jerk\nG21\nG28 ; Home extruder\nM420 S1 ; Enable MBL\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X30 Y30 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"},
         "machine_end_gcode": {"default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"},
+
+		"machine_max_feedrate_x": { "value": 1000 },
+        "machine_max_feedrate_y": { "value": 1000 },
+        "machine_max_feedrate_z": { "value": 3 },
+        "machine_max_feedrate_e": { "value": 40 },
+
+		"machine_max_acceleration_x": { "value": 1000 },
+        "machine_max_acceleration_y": { "value": 1000 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_acceleration_e": { "value": 10000 },
+        "machine_acceleration": { "value": 1000 },
+
+        "machine_max_jerk_xy": { "value": 8.0 },
+        "machine_max_jerk_z": { "value": 0.3 },
+        "machine_max_jerk_e": { "value": 5.0 },
 
         "machine_width": { "default_value": 200 },
         "machine_depth": { "default_value": 200 },