You can show your appreciation through
JTOPL is an FM sound source written in Verilog, fully compatible with YM3526. This project will most likely grow to include other Yamaha chips of the OPL family.
The implementation tries to be as close to original hardware as possible. Low usage of FPGA resources has also been a design goal.
Accuracy
- Follows Y8950 block diagram by Yamaha
- Barrel shift registers used for configuration values
- Takes note of all known reverse engineered information, particularly die shots
- Accurate at sample level, and at internal cycle clock where reasonable
- Original architecture kept as much as possible
Modern Design for FPGA
- Fully synchronous
- Clock enable input for easy integration
- Avoids bulky multiplexers
Directories:
- hdl -> all relevant RTL files, written in verilog
- ver -> test benches
- ver/verilator -> test bench that can play vgm files
Although many files are shared, each chip has its own top level file to instantiate. There are YAML files for each one that detail the list of files used for each file. These files can be easily converted to whatever format you need, like .qip.
Not all the chips of OPL series are implemented yet, so take the following table as a plan which I am working on.
Chip | Top Level Cell | YAML file | Type | Patches | Implemented | Usage |
---|---|---|---|---|---|---|
YM3526 | jtopl.v | jt26.yaml | OPL | Yes | Bubble Bobble | |
YM3812 | jtopl2.v | jtopl2.yaml | OPL2 | Yes | Robocop | |
Y8950 | jt8950.v | jt8950.yaml | OPL+ADPCM | Not yet | MSX-Audio | |
YM2413 | jt2413.v | jt2413.yaml | OPL-L | Yes | WIP | Pang! |
YM2423 | - | - | OPL-LX | Yes | No plans | Atari ST FM cart |
YMF281 | - | - | OPL-LLP | Yes | No plans | Pachinko |
YMF262 | jt262.v | jt262.yaml | OPL3 | Not yet |
Chip | Type | EG bits | Features |
---|---|---|---|
YM3526 | OPL | 9? | Basic OPL |
YM2413 | OPLL | 7 | Removes depth options for vibrato/tremolo |
Y8950 | OPL+ADPCM | 9? | Adds ADPCM |
YM3812 | OPL2 | 9? | Adds waveform select. Four waveforms |
YMF262 | OPL3 | 9 | No CSM. More operator modes, more channels |
There are several simulation test benches in the ver folder. The most important one is in the ver/verilator folder. The simulation script is called with the shell script go in the same folder. The script will compile the file test.cpp together with other files and the design and will simulate the tune specificied with the -f command. It can read vgm tunes and generate .wav output of them.
Each feature is tested with a given .jtt file in the ver/verilator/tests folder.
Feature | JTT File | Status (commit) | Remarks |
---|---|---|---|
TL | TL | ||
EG rates | rates | ||
fnum | fnum_abs | Passed 4a2c3cc | Checks absolute value of a note |
FB | fb | Passed 6e6178d | |
connection | mod | ||
EG type | perc | ||
All slots | slots | no modulation | |
All slots | slots_mod | Modulate some channels | |
KSL | ksl1/2/3 | Passed 4a2c3cc | See note* |
AM | am | Passed fc6ad19 | |
Vibratto | vib | Passed 44a540f | |
CSM | Not implemented | ||
OPL2 waves | tone_w? | Passed | Implemented |
Keyboard split | Untested b4345fa | Not implemented |
Note* values don't match the app notes but implementation follows reverse engineering of OPLL and OPL3. Measuring from first note of an octave to last note of the next seems to fit better the table in the notes.
They are bass drum, snare drum, tom-tom, high-hat, cymbals and top cymbals. Channels 6,7 and 8 are used for these instruments.
For patch-based OPL chips, there were specific values for each operator register of these instruments. However, for non-patched synthesizers, the user still had to enter register values. So it looks like the benefit from the rhythm feature was:
- Ability to enter more than one key-on command at once
- Noisy phase for three instruments
- Forced no modulation on 5 five instruments
Short name | Instrument | Slot | Phase | EG | Modulation |
---|---|---|---|---|---|
BD | Bass drum | 13 & 16 | Drum | Normal | |
HH | High hat | 14 | Special | Drum | No |
TOM | Tom tom | 15 | Drum | No | |
SD | Snare drum | 17 | Special | Drum | No |
TOP-CYM | Top cymbal | 18 | Special | Drum | No |
Other sound chips from the same author (Verilog RTL)
Chip | Repository |
---|---|
YM2203, YM2612, YM2610 | JT12 |
YM2151 | JT51 |
YM3526 | JTOPL |
YM2149 | JT49 |
sn76489an | JT89 |
OKI 6295 | JT6295 |
OKI MSM5205 | JT5205 |
Cycle accurate FM chips from Nuked (software emulation)
Chip | Repository |
---|---|
OPLL | Nuked-OPLL |
OPL3 | Nuked-OPL3 |
YM3438 | Nuked-OPN2 |