CHANGES

2.8 / <not released yet>

 - Fixed
   - Using a combination of --live and --json wasn't flushing stdout after
     each line resulting in buffered output if the output was being piped
   - Image output would fail to show the last line bar graph in list outputs
     if EstimateStyle was 0, BarColumnShowsRate was 1 and the last line had a
     higher traffic rate than other lines
   - Image output didn't correctly horizontally align the "no data available"
     message in 5 minute graph depending on the width of the image
   - Image output related configuration warnings could get shown when image
     output wasn't being used
   - Warnings of mismatches between image output and data retention
     configuration didn't provide relevant details for solving the issues
   - BandwidthDetection was being used for tun interfaces even when the
     Linux kernel had the information hardcoded to 10 Mbit regardless of the
     used real interface, interface specific MaxBW will now be used instead
     or MaxBandwidth as fallback
   - Configured interface specific MaxBW values were getting overridden by
     BandwidthDetection when something could be detected
   - Image output horizontal rx/tx bars often had one pixel too much width in
     the tx section resulting in slightly wrong ratio to be shown
   - Top days list wasn't always sorting entries with exactly the same traffic
     sum using ascending date
 - New
   - Add the possibility of specifying an interface without using the
     -i / --iface options (vnstat and vnstati)
   - Add configuration option UseUTC for using UTC as timezone for database
     entries instead of following the system timezone configuration
   - --iflist uses user configured interface specific MaxBW values in the
     output when available instead of showing only the kernel provided
     information when detected
   - Add configuration option AlwaysAddNewInterfaces to expose the daemon
     --alwaysadd command line option which gains an optional mode parameter
   - The daemon can discover added interfaces from the database without
     requiring a restart, configurable with option RescanDatabaseOnSave
   - Image output uses LibGD filled arc bug workaround only for LibGD
     versions that are known to be broken
   - Image output example cgi (examples/vnstat.cgi) improvements
     - Automatically lists all monitored interfaces instead of requiring the
       list to be filled manually, server name in page title comes from
       hostname command
     - Provides links for most available images to more detailed or longer
       versions of each image
     - Allows direct interface specific page access with /interfacename suffix
       for the cgi if the used httpd supports PATH_INFO
     - Has page auto refresh configurable


2.7 / 16-May-2021

 - Fixed
   - Possibility of segmentation fault with image list output when database
     existed but no data was available
   - ./configure output could show invalid install paths with some parameter
     combinations (pull request by Severin Glöckner)
   - Columns in text hours graph output could get misaligned if the selected
     system locale used a UTF-8 sequence for the thousands separator instead
     of a single character
 - New
   - Add -5g / --fivegraph options to image output with sizing related
     parameters for the output of a 5 minute resolution bar graph
   - Add configuration option SummaryGraph and optional parameter for
     --hsummary and --vsummary for selecting which graph is shown next to
     the summary data in the horizontal and vertical summary image outputs
   - Add --large / --small options and configuration option LargeFonts for
     controlling the image output font size
   - Add --scale and configuration option ImageScale for scaling the image
     output to a given percent
   - Add configuration option LineSpacingAdjustment for adjusting the line
     spacing of list format image outputs
   - Add bar visualizations for traffic estimations in image output
   - Allow writing image output to a filename starting with -
   - Add --initdb to daemon for creating a new empty database without having
     the daemon process staying running, doesn't discard data if a database
     already exists
   - Add configuration option BarColumnShowsRate for having the bar column in
     image list outputs be scaled according to the average rate column values
     when those values are visible, disabled by default
   - Add --dbiflist for getting a list of interfaces in the database, both
     --iflist and --dbiflist also get alternative more parseable outputs
   - Add configuration option for large font output and make 5 minute
     resolution graph visible in vnstat.cgi


2.6 / 20-Jan-2020

 - Fixed
   - --json and --xml didn't support having both mode and limit parameters
     defined at the same time as documented, broken since previous release
   - Documentation was using a mix of "count" and "limit" for the option of
     limiting the maximum number of shown entries in queries
   - Summary image output would segmentation fault when the database existed
     but didn't yet contain any daily or monthly data for the selected
     interface
 - New
   - Add --limit as an alternative way for controlling the length of outputs


2.5 / 14-Jan-2020

 - Fixed
   - Automatic interface selection wasn't done for --traffic and --live when
     the Interface configuration setting was left empty
   - --setalias didn't do anything when used in combination with --add
   - -l / --live and -tr default to first interface instead of producing an
     error if a interface merge is requested


2.4 / 18-Aug-2019

 - Fixed
   - Daemon didn't correctly wait when acquiring database lock for data write
     which could result in unnecessary errors and even process exit if an
     external database read operation had exactly the same timing as the
     daemon write operation
   - Daemon didn't fork() even when requested to with --daemon when started
     by PID 1 (issue seen at least in Docker containers)
   - Move vnstatd man page from section 1 to section 8
 - New
   - Add --rename for renaming interfaces already existing the database


2.3 / 10-Jul-2019

 - Fixed
   - Traffic rate wasn't being shown for the last entry of most lists during
     the first update of the next period (first SaveInterval minutes of each
     new hour, day, month and year)
   - Systemd example service file could result in database file write issues
     if the used systemd version supported ProtectSystem=strict but didn't
     support StateDirectory (issue seen at least with systemd 232 in Debian 9)
   - Debian and Red Hat init.d example files had wrong path for the pid file
   - Interfaces could end up staying marked as 'disabled' in the database even
     after becoming back active and monitored, only the shown status was wrong
     without resulting in any data loss
   - Some image outputs didn't allocate enough height for the image resulting
     in the last row having less space below it than intended
 - New
   - Automatic interface selection when the Interface configuration setting
     is left empty (new default)
   - Add configuration option DatabaseWriteAheadLogging to enable SQLite
     Write-Ahead Logging mode which may provide some disk i/o benefits,
     see https://www.sqlite.org/wal.html for more details and note that
     SQLite 3.22.0 or later is required to support read-only operations
   - Add configuration option DatabaseSynchronous for changing the SQLite
     setting of the "synchronous" flag, see
     https://www.sqlite.org/pragma.html#pragma_synchronous for more details
   - Show warning in log if writing cached data to database is slow
   - Try database query for up to 5 seconds when database is busy or locked
     instead of giving up immediately
   - Continue daemon process execution with data caching if database writes
     fail due to disk being full


2.2 / 28-Apr-2019

 - Fixed
   - O_CLOEXEC undeclared error when compiling with glibc older than 2.12
   - Image output --headertext wasn't being applied to some output types
   - DefaultDecimals setting wasn't controlling all outputs
   - Traffic rate for the last entry of the 5 minute resolution list wasn't
     being correctly calculated
 - New
   - Detection of 32-bit / 64-bit kernel interface counters for improving
     traffic calculations in rollover situations, cfg: 64bitInterfaceCounters
   - Possibility in queries to merge data from multiple interfaces to one
     output with interface1+interface2 syntax
   - Highlight current day in top list when visible
   - Changes in interface specific detected bandwidth limits are reported
     in the log
   - UpdateInterval value is automatically adjusted during daemon startup if
     found to be too high compared to the value of MaxBandwidth
 - Notes
   - Added clarification to the man page that the 'jsonversion' and
     'xmlversion' fields in the --json and --xml outputs should be seen as
     the API version and compared to the previously used version in 3rd party
     implementations for verifying compatibility
   - Default value of UpdateInterval is now 20 instead of previous 30 seconds


2.1 / 6-Dec-2018

 - Fixed
   - --oneline could segmentation fault if database had total traffic values
     set but didn't have any daily or monthly traffic (Arch bug #60588)
   - No proper error message was produced when querying interface which didn't
     exist in the database
   - Several typos and spelling mistakes in documentation
   - Daemon:waittimesync_does_not_wait_with_new_interfaces test was failing if
     the system used a time zone with a negative numeric value
   - Traffic estimate and average rate for ongoing month was not being
     calculated correctly when MonthRotate had a value greater than 1
   - Accuracy of traffic estimate and average rate for the ongoing month could
     be slightly skewed depending on the used time zone
 - New
   - Remove possible PollInterval and UpdateInterval drift over time
   - Sync SaveInterval to full minutes


2.0 / 21-Oct-2018

 - Fixed
   - Data rate calculations when using SI decimal prefixes
   - Workaround for filled arcs not drawn correctly with some versions
     of libgd (libgd/libgd#351)
 - New
   - C struct dump database has been replaced with sqlite database,
     full data import included from legacy databases of versions 1.3 - 1.18
   - User configurable data retention durations for all resolutions with
     following changed defaults:
                   v1.18     v2.0
       5 minutes     n/a      576   (48 hours)
       hours          24       96   (4 days)
       days           30       62   (2 full months)
       months         12       25   (2 full years)
       years         n/a      all
       top days       10       20
   - Option to select units to use SI decimal prefixes using calculations
     with powers of 1000 (IEC and JEDEC prefixes use powers of 1024)
   - Yearly and 5 minute resolution statistics
   - Pebibyte and exbibyte support
   - Options the configure the length of each list output
   - Option to limit the length of --json and --xml outputs
   - Hourly list output replaces the hourly graph when the -h parameter is used
   - Hourly graph is accessible with -hg / --hoursgraph parameter
   - Options -b / --begin and -e / --end for specifying query time range
   - Configuration comes with ISO 8601 date formats as new defaults
 - Removed
   - Weekly output
   - Merge of data from multiple interfaces to one output
   - --testkernel
   - --exportdb, use --oneline, --json or --xml instead
   - --importdb, -u / --update and related options using vnstat command
   - Old style (default in versions up to 1.7) summary layout in image output


1.18 / 4-Mar-2018

 - Fix: Misspellings, compiler warnings and possible error situations
   (pull requests by Christian Göttsche)
 - Hardening added to examples/systemd/vnstat.service
   (pull request by Christian Göttsche)
 - Add RTC sanity check and sync wait to daemon startup, the possible wait
   duration can be configured using the TimeSyncWait keyword
 - Add optional parameter to --oneline output for forcing fields to output
   in bytes
 - Add --json support for -l / --live and -tr outputs
 - Number of decimals used in outputs can be configured using DefaultDecimals
   and HourlyDecimals
 - Add section separators for improving readability of the vnstat -h output,
   configurable using HourlySectionStyle


1.17 / 16-Feb-2017

 - Fix: --importdb was creating invalid databases since version 1.15
 - Fix: console output was being buffered which resulted in lack of output
   in at least systemd log
 - Add cross-compilation detection and improve install-data-hook to not
   assume that the binaries can be executed in the host system


1.16 / 24-Dec-2016

 - Fix: traffic rate calculation, SI decimal prefixes were shown but
   calculation was done for IEC binary prefixes
 - Add option for configure to disable image output support even if required
   library is available, improve library detection
   (pull request by Rodrigo Rebello)
 - Add selection between SI decimal prefixes (kbit/s...) (default) and
   IEC binary prefixes (Kibit/s...) for traffic rate using RateUnitMode
   keyword in configuration file
 - Improve database handling resilience
 - Inherit database file ownership from database directory if UpdateFileOwner
   configuration option is enabled (default: enabled) when adding new
   interfaces for monitoring as root. This solves database file ownership
   mismatches when the daemon is started as a non-root user and an interface
   gets added for monitoring with a sudo command as root
 - Improve user guidance in error situations related to the configured default
   interface


1.15 / 22-Dec-2015

 - Fix: XML output had extra commas, broken since previous version
 - Fix: unintended shared pointer modification in mosecs() sometimes resulted
   in wrong month name to be shown for the current month
 - Fix: possible buffer overflow in /proc/net/dev parsing, requires corrupted
   content in /proc/net/dev or use of address sanitizer (found by Hanno Böck)
 - Use ANSI escape codes in -l and -tr modes for cursor location manipulation
   instead of printing backspaces, hide cursor while output is active
 - Improve database import robustness
 - Improve support for Asian UTF-8 date strings
 - Replace hand written Makefiles with Autotools
 - Add --alwaysadd parameter to daemon for allowing automatic addition of
   interfaces even if the database directory was populated during startup


1.14 / 26-Apr-2015

 - Fix: JSON output syntax during first day of newly created databases
   (pull request by Stefan Merettig)
 - Fix: field padding when using UTF-8 locale
 - Add optional mode parameter to --json and --xml for limiting the output
   to only selected information


1.13 / 18-Jan-2015

 - Fix: getgroup() test in Debian GNU/kFreeBSD (patch by Felix Geyer)
 - Fix: struct if_data usage after freeifaddrs() call in BSD
 - Dynamic unit selection in hourly output instead of being fixed to KiB
 - New options in image output (vnstati)
     * -nl / --nolegend for hiding the rx/tx legend
     * --altdate for using alternative date and time text location
     * --headertext for using custom text string in image header section
 - Add legend to hourly output image
 - Add option for content alignment and page background color to vnstat.cgi
 - Document keyword value ranges in configuration file man page
 - Import Makefile improvements from OpenBSD
   (pull requests by Jasper Lievisse Adriaanse)
 - Automatic interface bandwidth detection, BandwidthDetection in config,
   default fallback value MaxBandwidth changed from 100 to 1000
 - JSON output (--json), vnstat-json.cgi and vnstat-json.php examples
   provided in the 'examples' directory
 - Drop support for over 10 year old database formats (versions 1.0 - 1.2)


1.12 / 30-Aug-2014

 - Fix: Memory allocation when zero interfaces are available, also lo needed
   to be missing in order to trigger this leak
 - Fix: Rebuild total indexing (thanks to William Epp for reporting this)
 - Fix: Some error situations could leave database file open until the end
   of command execution
 - Fix: Live traffic meter occasionally showing higher minimum than average
   in end statistics (Debian Bug #687812)
 - Fix: Setting locale when none is specified in config (Debian Bug #606397)
 - Fix: Cppcheck findings (may fix Debian Bug #692330)
 - Improve traffic meter output accuracy
 - Add tests and debug compilation target
 - Remove use of -D parameter in Makefile install commands in order to
   improve cross-compilation support
 - Set CFLAGS in Makefiles only when not already defined
 - Add support for database import from text file (--importdb)
   (based on patch by Tilmann Bubeck)
 - Rename --dumpdb to --exportdb
 - Add example systemd service file
 - Add example launchd plist file for OS X
 - Use ISO YYYY-MM-DD date format timestamps if logfile is used
 - Improve daemon startup prints
 - Add parameters for changing daemon process user and group
 - Add example upstart job configuration file (thanks to Cameron Norman)
 - Create database, pid and log dirs during daemon startup if necessary
 - Update ownership of database, log and pid files if needed during daemon
   startup if started as root and configured to change process user and group
 - Remove cron update related example files and documentation, the cron
   update method should be considered as deprecated
 - --create parameter for database creation


1.11 / 1-Jun-2011

 - Fix: Memory allocation was miscalculated when creating interface list from
   /sys/class/net when /proc/net/dev wasn't available which in turn could
   crash the daemon
 - Fix: Daemon database cache could remain empty after a -HUP signal
 - Fix: Don't make temp directory in vnstat.cgi writable for everyone
 - Import GNU/kFreeBSD support from Debian
   (#608963, patch by Mats Erik Andersson)
 - Remove usage of GNU only '-D' option for install for BSD in Makefile
 - The daemon now automatically creates databases for available interfaces
   if no databases are found during startup


1.10 / 2-Jan-2010

 - Fix: Buffer overflow was possible in hourly image output when RateUnit=1
   and HourlyRate=1
 - Fix: Minor memory leak was possible in the handling of HUP signal in daemon
 - Fix: Graphical elements weren't correctly aligned in summary image
   when header wasn't visible (-nh)
 - Fix: --delete didn't work
 - Possibility to merge statistics from several databases and save
   the end result to a new database (--mergesaved)
 - Added validation of database cache in daemon in order to be more robust
   in case of system memory corruption
 - Support for --style to -l (live mode)
 - Alternative print mode to -l (live mode) with optional parameter
 - Present options and elements in man pages in alphabetical order
 - Code cleanup


1.9 / 12-Sep-2009

 - Fix: TrafficlessDays configuration option was enabled when set to zero
   when it should have been disabled
 - Fix: MonthRotate setting was getting ignored for the first month if
   the database is created when day of month < MonthRotate value
 - Configurable summary layout in image output (1.7 <> 1.8 layouts)
 - --oneline, a simple parseable one line output
 - --transparent for setting image background transparency from the
   command line
 - --delete for deleting databases and stopping monitoring, doesn't require
   restarting the daemon
 - A database write can be configure to occur after interface status changes
 - Different database write interval can be configure to be used when
   all monitored interfaces are offline
 - Better configurability for the content of outputs, including a narrow
   output for space limited terminals (OutputStyle and --style)
 - Code cleanup
 - New configuration file settings:
   OutputStyle, SummaryLayout, SummaryRate, SaveOnStatusChange,
   OfflineSaveInterval


1.8 / 1-Aug-2009

 - Fix: OpenBSD print issues (was: ' used for formatting in sprintf)
 - Fix: Monthly estimate for February during a leap year was wrong
 - Fix: 'make install' didn't install the config file is $(DESTDIR) was used
 - Traffic of current and previous months added to summary
 - Increased accuracy of monthly estimate calculation
 - Traffic rates can be made visible and the shown unit is configurable
   as bits or bytes
 - New summary layout in image output
 - Image output can have the background color set as transparent
 - Possibility to merge data from several interfaces to one output with
   interface1+interface2 syntax
 - -s / --sync parameter added to daemon
 - --dbdir and --locale parameters added
 - Outputs now use system locale by default and formatting of dates follow
   the locale setting unless configured otherwise
 - New configuration file settings:
   ShowRate, RateUnit, TrafficlessDays, HourlyRate, TransparentBg


1.7 / 12-Apr-2009

 - Fix: Timezone changes shouldn't cause a flood of errors anymore
 - Fix: Statvfs used instead of statfs for BSD compatibility
   (Thanks to Mark Mitchell for pointing this out)
 - Fix: Makefile didn't properly support LDFLAGS and -lm was misplaced
 - Fix: MonthRotate value in config wasn't used
 - Fix: Unreadable configuration file doesn't cause a segmentation fault
 - Fix: /proc/net/dev parser didn't see the difference between eth10 and eth1
 - Fix: Updating a database from two of more processes at the same time
   was able to sometimes cause data loss
 - Fix: Estimates are calculated based on last database update
 - Fix: Each interface update had a possibility of losing 1023 bytes of
   traffic at most due to improper rounding
   (Thanks to Michael Berlin for suggesting a suitable correction)
 - Daemon support as alternative for cron based updates
 - PNG image output (hourly rate based on patch by Sergio Ammirata)
 - XML output
 - BSD support
 - Diskspace check can be disabled from configuration file
 - IEC standard prefixes (KiB/MiB/GiB/TiB)
 - List of available interfaces if wrong of unavailable interface is selected


1.6 / 1-Jan-2008

 - Fix: Segmentation fault when environment variable "HOME" wasn't defined,
   this broke most CGI and PHP scripts that used vnStat
 - Support for /sys/class/net/* if /proc/net/dev is unavailable
 - Config file parser redesigned
 - --config parameter for selecting config file
 - Consistent exit status for all operations (0 for success, 1 for error)
 - Improved file locking
 - Man page restrictions paragraph updated
 - Minor non-visible fixes and code cleanup


1.5 / 3-Dec-2007

 - Fix: compile time warnings solved
 - Fix: kernel test is now more verbose
 - Fix: more informative error messages
 - Fix: possible division by zero for traffic estimates right after midnight
 - Fix: interface names longer than 6 chars (patch by Jan Schmidle)
 - Realtime transfer rate mode
 - Automatic 32bit/64bit counter detection
 - Config file support
 - Internal database backups and locking
 - More visuals in outputs
 - Adaptive units (kB, MB, GB, TB)
 - Possibility to sync counters without counting traffic
 - Maximum bandwidth of interfaces can be set


1.4 / 26-Mar-2004

 - Fix: major output problems when compiled with some compilers
        (thanks to DukePyrolator for reporting this bug and
         Juha / vlu for testing the patch)
 - Fix: month rotation if database isn't updated every day
 - Minor non-visible fixes and code cleanup


1.3 / 8-Mar-2004

 - Fix: support for 64bit counters
 - Fix: 'yesterday' was showing 01.01. with new databases
 - Fix: free space warning changed from 1% to 1MB
 - Fix: minor security exploit
 - A man page has been included
 - Hourly output with textgraphical view
 - kBs are visible when traffic is under 1000 MB
 - Webpage moved to http://humdi.net/vnstat/
 - Minor visual updates


1.2 / 7-Oct-2003

 - Changed file paths to conform with FHS (http://www.pathname.com/fhs/)
      /usr/local/bin/vnstat -> /usr/bin/vnstat
      /var/spool/vnstat -> /var/lib/vnstat
 - Added FAQ
 - Included sample scripts for pppd users
 - Support for 64bit counters in /proc/net/dev
   (Thanks to Stephan van Hienen for the test account)
 - Actual date is shown if the previous day in the database isn't
   yesterday
 - Weekly and last 7 days traffic can be shown.
   (Thanks to Derk-Jan Hartman for the suggestion)
 - Average kB/s meter
 - --testkernel fixed
 - Documentation for --dumpdb included in the README


1.1 / 13-Jul-2003

 - Support for multiple interfaces
 - Date checking (update shouldn't be before previous update)
 - New database structure
 - Possibility to change date output format
 - Test tool for faulty kernels
 - Parseable output
 - Better support for ppp/dsl users
 - Free diskspace check
 - Possibility to change month rotation day (like 25. instead of 1.)
 - Daily/monthly traffic estimation


22-Nov-2002

 - Renamed the cron script file that would be installed to /etc/cron.d
   from vnstat.cron to vnstat because debian systems didn't execute scripts
   containing dots (Thanks to frangen / Simo Salminen for this note)


1.0 / 23-Sep-2002

 - Initial public release