train_gpt2.c

/*
This file trains the GPT-2 model.
This version is the clean, minimal, reference. As such:
- it runs on CPU.
- it does not make the code too complex; it is readable.
- it does not use any processor-specific instructions, intrinsics and such.
- it _does_ use a few OpenMP pragmas because this is a large speedup at very low cost
There will be other versions of this code that specialize it and make it fast.
*/

#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <stdint.h>
#include <assert.h>
#include <math.h>
#include <time.h>
#include <string.h>
#include <unistd.h>
#ifdef OMP
#include <omp.h>
#endif

// ----------------------------------------------------------------------------
// all the individual layers' forward and backward passes
// B = batch_size, T = sequence_length, C = channels, V = vocab_size

void encoder_forward(float* out,
                   int* inp, float* wte, float* wpe,
                   int B, int T, int C) {
    // out is (B,T,C). At each position (b,t), a C-dimensional vector summarizing token & position
    // inp is (B,T) of integers, holding the token ids at each (b,t) position
    // wte is (V,C) of token embeddings, short for "weight token embeddings"
    // wpe is (maxT,C) of position embeddings, short for "weight positional embedding"
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            // seek to the output position in out[b,t,:]
            float* out_bt = out + b * T * C + t * C;
            // get the index of the token at inp[b, t]
            int ix = inp[b * T + t];
            // seek to the position in wte corresponding to the token
            float* wte_ix = wte + ix * C;
            // seek to the position in wpe corresponding to the position
            float* wpe_t = wpe + t * C;
            // add the two vectors and store the result in out[b,t,:]
            for (int i = 0; i < C; i++) {
                out_bt[i] = wte_ix[i] + wpe_t[i];
            }
        }
    }
}

void encoder_backward(float* dwte, float* dwpe,
                      float* dout, int* inp,
                      int B, int T, int C) {
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            float* dout_bt = dout + b * T * C + t * C;
            int ix = inp[b * T + t];
            float* dwte_ix = dwte + ix * C;
            float* dwpe_t = dwpe + t * C;
            for (int i = 0; i < C; i++) {
                float d = dout_bt[i];
                dwte_ix[i] += d;
                dwpe_t[i] += d;
            }
        }
    }
}

void layernorm_forward(float* out, float* mean, float* rstd,
                       float* inp, float* weight, float* bias,
                       int B, int T, int C) {
    // reference: https://pytorch.org/docs/stable/generated/torch.nn.LayerNorm.html
    // both inp and out are (B,T,C) of the activations
    // mean and rstd are (B,T) buffers, to be used later in backward pass
    // at each position (b,t) of the input, the C-dimensional vector
    // of activations gets normalized, then scaled and shifted
    float eps = 1e-5f;
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            // seek to the input position inp[b,t,:]
            float* x = inp + b * T * C + t * C;
            // calculate the mean
            float m = 0.0f;
            for (int i = 0; i < C; i++) {
                m += x[i];
            }
            m = m/C;
            // calculate the variance (without any bias correction)
            float v = 0.0f;
            for (int i = 0; i < C; i++) {
                float xshift = x[i] - m;
                v += xshift * xshift;
            }
            v = v/C;
            // calculate the rstd (reciprocal standard deviation)
            float s = 1.0f / sqrtf(v + eps);
            // seek to the output position in out[b,t,:]
            float* out_bt = out + b * T * C + t * C;
            for (int i = 0; i < C; i++) {
                float n = (s * (x[i] - m)); // normalize
                float o = n * weight[i] + bias[i]; // scale and shift
                out_bt[i] = o; // write
            }
            // cache the mean and rstd for the backward pass later
            mean[b * T + t] = m;
            rstd[b * T + t] = s;
        }
    }
}

void layernorm_backward(float* dinp, float* dweight, float* dbias,
                        float* dout, float* inp, float* weight, float* mean, float* rstd,
                        int B, int T, int C) {
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            float* dout_bt = dout + b * T * C + t * C;
            float* inp_bt = inp + b * T * C + t * C;
            float* dinp_bt = dinp + b * T * C + t * C;
            float mean_bt = mean[b * T + t];
            float rstd_bt = rstd[b * T + t];

            // first: two reduce operations
            float dnorm_mean = 0.0f;
            float dnorm_norm_mean = 0.0f;
            for (int i = 0; i < C; i++) {
                float norm_bti = (inp_bt[i] - mean_bt) * rstd_bt;
                float dnorm_i = weight[i] * dout_bt[i];
                dnorm_mean += dnorm_i;
                dnorm_norm_mean += dnorm_i * norm_bti;
            }
            dnorm_mean = dnorm_mean / C;
            dnorm_norm_mean = dnorm_norm_mean / C;

            // now iterate again and accumulate all the gradients
            for (int i = 0; i < C; i++) {
                float norm_bti = (inp_bt[i] - mean_bt) * rstd_bt;
                float dnorm_i = weight[i] * dout_bt[i];
                // gradient contribution to bias
                dbias[i] += dout_bt[i];
                // gradient contribution to weight
                dweight[i] += norm_bti * dout_bt[i];
                // gradient contribution to input
                float dval = 0.0f;
                dval += dnorm_i; // term 1
                dval -= dnorm_mean; // term 2
                dval -= norm_bti * dnorm_norm_mean; // term 3
                dval *= rstd_bt; // final scale
                dinp_bt[i] += dval;
            }
        }
    }
}

void matmul_forward(float* out,
                    float* inp, float* weight, float* bias,
                    int B, int T, int C, int OC) {
    // most of the running time is spent here and in matmul_backward
    // OC is short for "output channels"
    // inp is (B,T,C), weight is (OC, C), bias is (OC)
    // out will be (B,T,OC)
    #pragma omp parallel for collapse(2)
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            float* out_bt = out + b * T * OC + t * OC;
            float* inp_bt = inp + b * T * C + t * C;
            for (int o = 0; o < OC; o++) {
                float val = (bias != NULL) ? bias[o] : 0.0f;
                float* wrow = weight + o*C;
                for (int i = 0; i < C; i++) {
                    val += inp_bt[i] * wrow[i];
                }
                out_bt[o] = val;
            }
        }
    }
}

void matmul_backward(float* dinp, float* dweight, float* dbias,
                     float* dout, float* inp, float* weight,
                     int B, int T, int C, int OC) {
    // most of the running time is spent here and in matmul_forward
    // this backward could be done in a single "round" of loops
    // but that doesn't afford an efficient parallelization strategy

    // backward into inp first, parallelize over B,T
    #pragma omp parallel for collapse(2)
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            float* dout_bt = dout + b * T * OC + t * OC;
            float* dinp_bt = dinp + b * T * C + t * C;
            for (int o = 0; o < OC; o++) {
                float* wrow = weight + o*C;
                float d = dout_bt[o];
                for (int i = 0; i < C; i++) {
                    dinp_bt[i] += wrow[i] * d;
                }
            }
        }
    }
    // backward into weight/bias, parallelize over output channels OC
    #pragma omp parallel for
    for (int o = 0; o < OC; o++) {
        for (int b = 0; b < B; b++) {
            for (int t = 0; t < T; t++) {
                float* dout_bt = dout + b * T * OC + t * OC;
                float* inp_bt = inp + b * T * C + t * C;
                float* dwrow = dweight + o*C;
                float d = dout_bt[o];
                if (dbias != NULL) { dbias[o] += d; }
                for (int i = 0; i < C; i++) {
                    dwrow[i] += inp_bt[i] * d;
                }
            }
        }
    }
}

void attention_forward(float* out, float* preatt, float* att,
                       float* inp,
                       int B, int T, int C, int NH) {
    // input is (B, T, 3C) holding the query, key, value (Q, K, V) vectors
    // preatt, att are (B, NH, T, T). NH = number of heads, T = sequence length
    // that holds the pre-attention and post-attention scores (used in backward)
    // output is (B, T, C)
    // attention is the only layer that mixes information across time
    // every other operation is applied at every (b,t) position independently
    // (and of course, no layer mixes information across batch)
    int C3 = C*3;
    int hs = C / NH; // head size
    float scale = 1.0 / sqrtf(hs);

    #pragma omp parallel for collapse(3)
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            for (int h = 0; h < NH; h++) {
                float* query_t = inp + b * T * C3 + t * C3 + h * hs;
                float* preatt_bth = preatt + b*NH*T*T + h*T*T + t*T;
                float* att_bth = att + b*NH*T*T + h*T*T + t*T;

                // pass 1: calculate query dot key and maxval
                float maxval = -10000.0f; // TODO something better
                for (int t2 = 0; t2 <= t; t2++) {
                    float* key_t2 = inp + b * T * C3 + t2 * C3 + h * hs + C; // +C because it's key

                    // (query_t) dot (key_t2)
                    float val = 0.0f;
                    for (int i = 0; i < hs; i++) {
                        val += query_t[i] * key_t2[i];
                    }
                    val *= scale;
                    if (val > maxval) {
                        maxval = val;
                    }

                    preatt_bth[t2] = val;
                }

                // pass 2: calculate the exp and keep track of sum
                // maxval is being calculated and subtracted only for numerical stability
                float expsum = 0.0f;
                for (int t2 = 0; t2 <= t; t2++) {
                    float expv = expf(preatt_bth[t2] - maxval);
                    expsum += expv;
                    att_bth[t2] = expv;
                }
                float expsum_inv = expsum == 0.0f ? 0.0f : 1.0f / expsum;

                // pass 3: normalize to get the softmax
                for (int t2 = 0; t2 < T; t2++) {
                    if (t2 <= t) {
                        att_bth[t2] *= expsum_inv;
                    } else {
                        // causal attention mask. not strictly necessary to set to zero here
                        // only doing this explicitly for debugging and checking to PyTorch
                        att_bth[t2] = 0.0f;
                    }
                }

                // pass 4: accumulate weighted values into the output of attention
                float* out_bth = out + b * T * C + t * C + h * hs;
                for (int i = 0; i < hs; i++) { out_bth[i] = 0.0f; }
                for (int t2 = 0; t2 <= t; t2++) {
                    float* value_t2 = inp + b * T * C3 + t2 * C3 + h * hs + C*2; // +C*2 because it's value
                    float att_btht2 = att_bth[t2];
                    for (int i = 0; i < hs; i++) {
                        out_bth[i] += att_btht2 * value_t2[i];
                    }
                }
            }
        }
    }
}

void attention_backward(float* dinp, float* dpreatt, float* datt,
                        float* dout, float* inp, float* att,
                        int B, int T, int C, int NH) {
    // inp/dinp are (B, T, 3C) Q,K,V
    // att/datt/dpreatt are (B, NH, T, T)
    // dout is (B, T, C)
    int C3 = C*3;
    int hs = C / NH; // head size
    float scale = 1.0 / sqrtf(hs);

    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            for (int h = 0; h < NH; h++) {
                float* att_bth = att + b*NH*T*T + h*T*T + t*T;
                float* datt_bth = datt + b*NH*T*T + h*T*T + t*T;
                float* dpreatt_bth = dpreatt + b*NH*T*T + h*T*T + t*T;
                float* dquery_t = dinp + b * T * C3 + t * C3 + h * hs;
                float* query_t = inp + b * T * C3 + t * C3 + h * hs;

                // backward pass 4, through the value accumulation
                float* dout_bth = dout + b * T * C + t * C + h * hs;
                for (int t2 = 0; t2 <= t; t2++) {
                    float* value_t2 = inp + b * T * C3 + t2 * C3 + h * hs + C*2; // +C*2 because it's value
                    float* dvalue_t2 = dinp + b * T * C3 + t2 * C3 + h * hs + C*2;
                    for (int i = 0; i < hs; i++) {
                        // in the forward pass this was:
                        // out_bth[i] += att_bth[t2] * value_t2[i];
                        // so now we have:
                        datt_bth[t2] += value_t2[i] * dout_bth[i];
                        dvalue_t2[i] += att_bth[t2] * dout_bth[i];
                    }
                }

                // backward pass 2 & 3, the softmax
                // note that softmax (like e.g. tanh) doesn't need the input (preatt) to backward
                for (int t2 = 0; t2 <= t; t2++) {
                    for (int t3 = 0; t3 <= t; t3++) {
                        float indicator = t2 == t3 ? 1.0f : 0.0f;
                        float local_derivative = att_bth[t2] * (indicator - att_bth[t3]);
                        dpreatt_bth[t3] += local_derivative * datt_bth[t2];
                    }
                }

                // backward pass 1, the query @ key matmul
                for (int t2 = 0; t2 <= t; t2++) {
                    float* key_t2 = inp + b * T * C3 + t2 * C3 + h * hs + C; // +C because it's key
                    float* dkey_t2 = dinp + b * T * C3 + t2 * C3 + h * hs + C; // +C because it's key
                    for (int i = 0; i < hs; i++) {
                        // in the forward pass this was:
                        // preatt_bth[t2] += (query_t[i] * key_t2[i]) * scale;
                        // so now we have:
                        dquery_t[i] += key_t2[i] * dpreatt_bth[t2] * scale;
                        dkey_t2[i] += query_t[i] * dpreatt_bth[t2] * scale;
                    }
                }
            }
        }
    }
}

#define GELU_SCALING_FACTOR sqrtf(2.0f / M_PI)
void gelu_forward(float* out, float* inp, int N) {
    // (approximate) GeLU elementwise non-linearity in the MLP block of Transformer
    for (int i = 0; i < N; i++) {
        float x = inp[i];
        float cube = 0.044715f * x * x * x;
        out[i] = 0.5f * x * (1.0f + tanhf(GELU_SCALING_FACTOR * (x + cube)));
    }
}

void gelu_backward(float* dinp, float* inp, float* dout, int N) {
    for (int i = 0; i < N; i++) {
        float x = inp[i];
        float cube = 0.044715f * x * x * x;
        float tanh_arg = GELU_SCALING_FACTOR * (x + cube);
        float tanh_out = tanhf(tanh_arg);
        float coshf_out = coshf(tanh_arg);
        float sech_out = 1.0f / (coshf_out * coshf_out);
        float local_grad = 0.5f * (1.0f + tanh_out) + x * 0.5f * sech_out * GELU_SCALING_FACTOR * (1.0f + 3.0f * 0.044715f * x * x);
        dinp[i] += local_grad * dout[i];
    }
}

void residual_forward(float* out, float* inp1, float* inp2, int N) {
    for (int i = 0; i < N; i++) {
        out[i] = inp1[i] + inp2[i];
    }
}

void residual_backward(float* dinp1, float* dinp2, float* dout, int N) {
    for (int i = 0; i < N; i++) {
        dinp1[i] += dout[i];
        dinp2[i] += dout[i];
    }
}

void softmax_forward(float* probs, float* logits, int B, int T, int V) {
    // output: probs are (B,T,V) of the probabilities (sums to 1.0 in each b,t position)
    // input: logits is (B,T,V) of the unnormalized log probabilities
    #pragma omp parallel for collapse(2)
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            // probs <- softmax(logits)
            float* logits_bt = logits + b * T * V + t * V;
            float* probs_bt = probs + b * T * V + t * V;

            // maxval is only calculated and subtracted for numerical stability
            float maxval = -10000.0f; // TODO something better
            for (int i = 0; i < V; i++) {
                if (logits_bt[i] > maxval) {
                    maxval = logits_bt[i];
                }
            }
            float sum = 0.0f;
            for (int i = 0; i < V; i++) {
                probs_bt[i] = expf(logits_bt[i] - maxval);
                sum += probs_bt[i];
            }
            for (int i = 0; i < V; i++) {
                probs_bt[i] /= sum;
            }
        }
    }
}

void crossentropy_forward(float* losses,
                          float* probs, int* targets,
                          int B, int T, int V) {
    // output: losses is (B,T) of the individual losses at each position
    // input: probs are (B,T,V) of the probabilities
    // input: targets is (B,T) of integers giving the correct index in logits
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            // loss = -log(probs[target])
            float* probs_bt = probs + b * T * V + t * V;
            int ix = targets[b * T + t];
            losses[b * T + t] = -logf(probs_bt[ix]);
        }
    }
}

void crossentropy_softmax_backward(float* dlogits,
                           float* dlosses, float* probs, int* targets,
                           int B, int T, int V) {
    // backwards through both softmax and crossentropy
    for (int b = 0; b < B; b++) {
        for (int t = 0; t < T; t++) {
            float* dlogits_bt = dlogits + b * T * V + t * V;
            float* probs_bt = probs + b * T * V + t * V;
            float dloss = dlosses[b * T + t];
            int ix = targets[b * T + t];
            for (int i = 0; i < V; i++) {
                float p = probs_bt[i];
                float indicator = i == ix ? 1.0f : 0.0f;
                dlogits_bt[i] += (p - indicator) * dloss;
            }
        }
    }
}

// ----------------------------------------------------------------------------
// GPT-2 model definition

// the parameters of the model
#define NUM_PARAMETER_TENSORS 16
typedef struct {
    float* wte; // (V, C)
    float* wpe; // (maxT, C)
    float* ln1w; // (L, C)
    float* ln1b; // (L, C)
    float* qkvw; // (L, 3*C, C)
    float* qkvb; // (L, 3*C)
    float* attprojw; // (L, C, C)
    float* attprojb; // (L, C)
    float* ln2w; // (L, C)
    float* ln2b; // (L, C)
    float* fcw; // (L, 4*C, C)
    float* fcb; // (L, 4*C)
    float* fcprojw; // (L, C, 4*C)
    float* fcprojb; // (L, C)
    float* lnfw; // (C)
    float* lnfb; // (C)
} ParameterTensors;

// allocate memory for the parameters and point the individual tensors to the right places
float* malloc_and_point_parameters(ParameterTensors* params, size_t* param_sizes) {
    size_t num_parameters = 0;
    for (size_t i = 0; i < NUM_PARAMETER_TENSORS; i++) {
        num_parameters += param_sizes[i];
    }
    // malloc all parameters all at once
    float* params_memory = (float*)malloc(num_parameters * sizeof(float));
    // assign all the tensors
    float** ptrs[] = {
        &params->wte, &params->wpe, &params->ln1w, &params->ln1b, &params->qkvw, &params->qkvb,
        &params->attprojw, &params->attprojb, &params->ln2w, &params->ln2b, &params->fcw, &params->fcb,
        &params->fcprojw, &params->fcprojb, &params->lnfw, &params->lnfb
    };
    float* params_memory_iterator = params_memory;
    for (size_t i = 0; i < NUM_PARAMETER_TENSORS; i++) {
        *(ptrs[i]) = params_memory_iterator;
        params_memory_iterator += param_sizes[i];
    }
    return params_memory;
}

#define NUM_ACTIVATION_TENSORS 23
typedef struct {
    float* encoded; // (B, T, C)
    float* ln1; // (L, B, T, C)
    float* ln1_mean; // (L, B, T)
    float* ln1_rstd; // (L, B, T)
    float* qkv; // (L, B, T, 3*C)
    float* atty; // (L, B, T, C)
    float* preatt; // (L, B, NH, T, T)
    float* att; // (L, B, NH, T, T)
    float* attproj; // (L, B, T, C)
    float* residual2; // (L, B, T, C)
    float* ln2; // (L, B, T, C)
    float* ln2_mean; // (L, B, T)
    float* ln2_rstd; // (L, B, T)
    float* fch; // (L, B, T, 4*C)
    float* fch_gelu; // (L, B, T, 4*C)
    float* fcproj; // (L, B, T, C)
    float* residual3; // (L, B, T, C)
    float* lnf; // (B, T, C)
    float* lnf_mean; // (B, T)
    float* lnf_rstd; // (B, T)
    float* logits; // (B, T, V)
    float* probs; // (B, T, V)
    float* losses; // (B, T)
} ActivationTensors;

float* malloc_and_point_activations(ActivationTensors* acts, size_t* act_sizes) {
    size_t num_activations = 0;
    for (size_t i = 0; i < NUM_ACTIVATION_TENSORS; i++) {
        num_activations += act_sizes[i];
    }
    float* acts_memory = (float*)malloc(num_activations * sizeof(float));
    float** ptrs[] = {
        &acts->encoded, &acts->ln1, &acts->ln1_mean, &acts->ln1_rstd, &acts->qkv, &acts->atty,
        &acts->preatt, &acts->att, &acts->attproj, &acts->residual2, &acts->ln2, &acts->ln2_mean,
        &acts->ln2_rstd, &acts->fch, &acts->fch_gelu, &acts->fcproj, &acts->residual3, &acts->lnf,
        &acts->lnf_mean, &acts->lnf_rstd, &acts->logits, &acts->probs, &acts->losses
    };
    float* acts_memory_iterator = acts_memory;
    for (size_t i = 0; i < NUM_ACTIVATION_TENSORS; i++) {
        *(ptrs[i]) = acts_memory_iterator;
        acts_memory_iterator += act_sizes[i];
    }
    return acts_memory;
}

typedef struct {
    int max_seq_len; // max sequence length, e.g. 1024
    int vocab_size; // vocab size, e.g. 50257
    int num_layers; // number of layers, e.g. 12
    int num_heads; // number of heads in attention, e.g. 12
    int channels; // number of channels, e.g. 768
} GPT2Config;

typedef struct {
    GPT2Config config;
    // the weights (parameters) of the model, and their sizes
    ParameterTensors params;
    size_t param_sizes[NUM_PARAMETER_TENSORS];
    float* params_memory;
    size_t num_parameters;
    // gradients of the weights
    ParameterTensors grads;
    float* grads_memory;
    // buffers for the AdamW optimizer
    float* m_memory;
    float* v_memory;
    // the activations of the model, and their sizes
    ActivationTensors acts;
    size_t act_sizes[NUM_ACTIVATION_TENSORS];
    float* acts_memory;
    size_t num_activations;
    // gradients of the activations
    ActivationTensors grads_acts;
    float* grads_acts_memory;
    // other run state configuration
    int batch_size; // the batch size (B) of current forward pass
    int seq_len; // the sequence length (T) of current forward pass
    int* inputs; // the input tokens for the current forward pass
    int* targets; // the target tokens for the current forward pass
    float mean_loss; // after a forward pass with targets, will be populated with the mean loss
} GPT2;

void gpt2_build_from_checkpoint(GPT2 *model, char* checkpoint_path) {

    // read in model from a checkpoint file
    FILE *model_file = fopen(checkpoint_path, "rb");
    if (model_file == NULL) { printf("Error opening model file\n"); exit(1); }
    int model_header[256];
    fread(model_header, sizeof(int), 256, model_file);
    if (model_header[0] != 20240326) { printf("Bad magic model file"); exit(1); }
    if (model_header[1] != 1) { printf("Bad version in model file"); exit(1); }

    // read in hyperparameters
    int maxT, V, L, NH, C;
    model->config.max_seq_len = maxT = model_header[2];
    model->config.vocab_size = V = model_header[3];
    model->config.num_layers = L = model_header[4];
    model->config.num_heads = NH = model_header[5];
    model->config.channels = C = model_header[6];
    printf("[GPT-2]\n");
    printf("max_seq_len: %d\n", maxT);
    printf("vocab_size: %d\n", V);
    printf("num_layers: %d\n", L);
    printf("num_heads: %d\n", NH);
    printf("channels: %d\n", C);

    // allocate space for all the parameters and read them in
    model->param_sizes[0] = V * C; // wte
    model->param_sizes[1] = maxT * C; // wpe
    model->param_sizes[2] = L * C; // ln1w
    model->param_sizes[3] = L * C; // ln1b
    model->param_sizes[4] = L * (3 * C) * C; // qkvw
    model->param_sizes[5] = L * (3 * C); // qkvb
    model->param_sizes[6] = L * C * C; // attprojw
    model->param_sizes[7] = L * C; // attprojb
    model->param_sizes[8] = L * C; // ln2w
    model->param_sizes[9] = L * C; // ln2b
    model->param_sizes[10] = L * (4 * C) * C; // fcw
    model->param_sizes[11] = L * (4 * C); // fcb
    model->param_sizes[12] = L * C * (4 * C); // fcprojw
    model->param_sizes[13] = L * C; // fcprojb
    model->param_sizes[14] = C; // lnfw
    model->param_sizes[15] = C; // lnfb

    // count the number of parameters
    size_t num_parameters = 0;
    for (size_t i = 0; i < NUM_PARAMETER_TENSORS; i++) {
        num_parameters += model->param_sizes[i];
    }
    printf("num_parameters: %zu\n", num_parameters);
    model->num_parameters = num_parameters;

    // read in all the parameters from file
    model->params_memory = malloc_and_point_parameters(&model->params, model->param_sizes);
    fread(model->params_memory, sizeof(float), num_parameters, model_file);
    fclose(model_file);

    // other inits
    model->acts_memory = NULL;
    model->grads_memory = NULL;
    model->m_memory = NULL;
    model->v_memory = NULL;
    model->grads_acts_memory = NULL;
    model->inputs = NULL;
    model->targets = NULL;
    model->batch_size = 0;
    model->seq_len = 0;
    model->mean_loss = -1.0f; // -1.0f will designate no loss
}

void gpt2_forward(GPT2 *model, int* inputs, int* targets, int B, int T) {
    // targets are optional and could be NULL

    // ensure the model was initialized or error out
    if (model->params_memory == NULL) {
        printf("Error: model was not initialized properly.\n");
        exit(1);
    }

    // convenience parameters
    int V = model->config.vocab_size;
    int L = model->config.num_layers;
    int NH = model->config.num_heads;
    int C = model->config.channels;

    // validate inputs, all indices must be in the range [0, V)
    for(int i = 0; i < B * T; i++) {
        assert(0 <= inputs[i] && inputs[i] < V);
        if (targets != NULL) {
            assert(0 <= targets[i] && targets[i] < V);
        }
    }

    // allocate space for all the activations if needed (done here, lazily)
    if(model->acts_memory == NULL) {
        // record the current B,T as well
        model->batch_size = B;
        model->seq_len = T;
        // and now allocate the space
        model->act_sizes[0] = B * T * C; // encoded
        model->act_sizes[1] = L * B * T * C; // ln1
        model->act_sizes[2] = L * B * T;  // ln1_mean
        model->act_sizes[3] = L * B * T;  // ln1_rstd
        model->act_sizes[4] = L * B * T * 3*C; // qkv
        model->act_sizes[5] = L * B * T * C;  // atty
        model->act_sizes[6] = L * B * NH * T * T;  // preatt
        model->act_sizes[7] = L * B * NH * T * T;  // att
        model->act_sizes[8] = L * B * T * C; // attproj
        model->act_sizes[9] = L * B * T * C; // residual2
        model->act_sizes[10] = L * B * T * C; // ln2
        model->act_sizes[11] = L * B * T; // ln2_mean
        model->act_sizes[12] = L * B * T; // ln2_rstd
        model->act_sizes[13] = L * B * T * 4*C; // fch
        model->act_sizes[14] = L * B * T * 4*C; // fch_gelu
        model->act_sizes[15] = L * B * T * C; // fcproj
        model->act_sizes[16] = L * B * T * C; // residual3
        model->act_sizes[17] = B * T * C; // lnf
        model->act_sizes[18] = B * T; // lnf_mean
        model->act_sizes[19] = B * T; // lnf_rstd
        model->act_sizes[20] = B * T * V; // logits
        model->act_sizes[21] = B * T * V; // probs
        model->act_sizes[22] = B * T; // losses
        size_t num_activations = 0;
        for (size_t i = 0; i < NUM_ACTIVATION_TENSORS; i++) {
            num_activations += model->act_sizes[i];
        }
        printf("num_activations: %zu\n", num_activations);
        model->num_activations = num_activations;
        model->acts_memory = malloc_and_point_activations(&model->acts, model->act_sizes);
        // also create memory for caching inputs and targets
        model->inputs = (int*)malloc(B * T * sizeof(int));
        model->targets = (int*)malloc(B * T * sizeof(int)); // might be unused if we never have targets but it's small
    } else {
        // validate B,T is consistent with how we've allocated the memory before
        // in principle we could get more clever here in the future, for now this is safest
        if (B != model->batch_size || T != model->seq_len) {
            printf("Model: B=%d T=%d, Desired: B=%d T=%d\n", model->batch_size, model->seq_len, B, T);
            exit(EXIT_FAILURE);
        }
    }

    // cache the inputs/targets
    memcpy(model->inputs, inputs, B * T * sizeof(int));
    if (targets != NULL) {
        memcpy(model->targets, targets, B * T * sizeof(int));
    }

    // forward pass
    ParameterTensors params = model->params; // for brevity
    ActivationTensors acts = model->acts;
    float* residual;
    encoder_forward(acts.encoded, inputs, params.wte, params.wpe, B, T, C); // encoding goes into residual[0]
    for (int l = 0; l < L; l++) {

        residual = l == 0 ? acts.encoded : acts.residual3 + (l-1) * B * T * C;

        // get the pointers of the weights for this layer
        float* l_ln1w = params.ln1w + l * C;
        float* l_ln1b = params.ln1b + l * C;
        float* l_qkvw = params.qkvw + l * 3*C * C;
        float* l_qkvb = params.qkvb + l * 3*C;
        float* l_attprojw = params.attprojw + l * C * C;
        float* l_attprojb = params.attprojb + l * C;
        float* l_ln2w = params.ln2w + l * C;
        float* l_ln2b = params.ln2b + l * C;
        float* l_fcw = params.fcw + l * 4*C * C;
        float* l_fcb = params.fcb + l * 4*C;
        float* l_fcprojw = params.fcprojw + l * C * 4*C;
        float* l_fcprojb = params.fcprojb + l * C;

        // get the pointers of the activations for this layer
        float* l_ln1 = acts.ln1 + l * B * T * C;
        float* l_ln1_mean = acts.ln1_mean + l * B * T;
        float* l_ln1_rstd = acts.ln1_rstd + l * B * T;
        float* l_qkv = acts.qkv + l * B * T * 3*C;
        float* l_atty = acts.atty + l * B * T * C;
        float* l_preatt = acts.preatt + l * B * NH * T * T;
        float* l_att = acts.att + l * B * NH * T * T;
        float* l_attproj = acts.attproj + l * B * T * C;
        float* l_residual2 = acts.residual2 + l * B * T * C;
        float* l_ln2 = acts.ln2 + l * B * T * C;
        float* l_ln2_mean = acts.ln2_mean + l * B * T;
        float* l_ln2_rstd = acts.ln2_rstd + l * B * T;
        float* l_fch = acts.fch + l * B * T * 4*C;
        float* l_fch_gelu = acts.fch_gelu + l * B * T * 4*C;
        float* l_fcproj = acts.fcproj + l * B * T * C;
        float* l_residual3 = acts.residual3 + l * B * T * C;

        // now do the forward pass
        layernorm_forward(l_ln1, l_ln1_mean, l_ln1_rstd, residual, l_ln1w, l_ln1b, B, T, C);
        matmul_forward(l_qkv, l_ln1, l_qkvw, l_qkvb, B, T, C, 3*C);
        attention_forward(l_atty, l_preatt, l_att, l_qkv, B, T, C, NH);
        matmul_forward(l_attproj, l_atty, l_attprojw, l_attprojb, B, T, C, C);
        residual_forward(l_residual2, residual, l_attproj, B*T*C);
        layernorm_forward(l_ln2, l_ln2_mean, l_ln2_rstd, l_residual2, l_ln2w, l_ln2b, B, T, C);
        matmul_forward(l_fch, l_ln2, l_fcw, l_fcb, B, T, C, 4*C);
        gelu_forward(l_fch_gelu, l_fch, B*T*4*C);
        matmul_forward(l_fcproj, l_fch_gelu, l_fcprojw, l_fcprojb, B, T, 4*C, C);
        residual_forward(l_residual3, l_residual2, l_fcproj, B*T*C);
    }
    residual = acts.residual3 + (L-1) * B * T * C; // last residual is in residual3
    layernorm_forward(acts.lnf, acts.lnf_mean, acts.lnf_rstd, residual, params.lnfw, params.lnfb, B, T, C);
    matmul_forward(acts.logits, acts.lnf, params.wte, NULL, B, T, C, V);
    softmax_forward(acts.probs, acts.logits, B, T, V);

    // also forward the cross-entropy loss function if we have the targets
    if (targets != NULL) {
        crossentropy_forward(model->acts.losses, model->acts.probs, targets, B, T, V);
        // for convenience also evaluate the mean loss
        float mean_loss = 0.0f;
        for (int i=0; i<B*T; i++) { mean_loss += model->acts.losses[i]; }
        mean_loss /= B*T;
        model->mean_loss = mean_loss;
    } else {
        // if we don't have targets, we don't have a loss
        model->mean_loss = -1.0f;
    }
}

void gpt2_zero_grad(GPT2 *model) {
    if(model->grads_memory != NULL) { memset(model->grads_memory, 0, model->num_parameters * sizeof(float)); }
    if(model->grads_acts_memory != NULL) { memset(model->grads_acts_memory, 0, model->num_activations * sizeof(float)); }
}

void gpt2_backward(GPT2 *model) {

    // double check we forwarded previously, with targets
    if (model->mean_loss == -1.0f) {
        printf("Error: must forward with targets before backward\n");
        exit(1);
    }

    // lazily allocate the memory for gradients of the weights and activations, if needed
    if (model->grads_memory == NULL) {
        model->grads_memory = malloc_and_point_parameters(&model->grads, model->param_sizes);
        model->grads_acts_memory = malloc_and_point_activations(&model->grads_acts, model->act_sizes);
        gpt2_zero_grad(model);
    }

    // convenience shortcuts
    int B = model->batch_size;
    int T = model->seq_len;
    int V = model->config.vocab_size;
    int L = model->config.num_layers;
    int NH = model->config.num_heads;
    int C = model->config.channels;

    // backward pass: go in the reverse order of the forward pass, and call backward() functions
    ParameterTensors params = model->params; // for brevity
    ParameterTensors grads = model->grads;
    ActivationTensors acts = model->acts;
    ActivationTensors grads_acts = model->grads_acts;

    // we kick off the chain rule by filling in dlosses with 1.0f/(B*T)
    // technically this is a small, inline backward() pass of calculating
    // total, final loss as the mean over all losses over all (B,T) positions in the batch
    float dloss_mean = 1.0f / (B*T);
    for (int i = 0; i < B*T; i++) { grads_acts.losses[i] = dloss_mean; }

    crossentropy_softmax_backward(grads_acts.logits, grads_acts.losses, acts.probs, model->targets, B, T, V);
    matmul_backward(grads_acts.lnf, grads.wte, NULL, grads_acts.logits, acts.lnf, params.wte, B, T, C, V);
    float* residual = acts.residual3 + (L-1) * B * T * C; // last layer's residual
    float* dresidual = grads_acts.residual3 + (L-1) * B * T * C; // write to last layer's residual
    layernorm_backward(dresidual, grads.lnfw, grads.lnfb, grads_acts.lnf, residual, params.lnfw, acts.lnf_mean, acts.lnf_rstd, B, T, C);

    for (int l = L-1; l >= 0; l--) {

        residual = l == 0 ? acts.encoded : acts.residual3 + (l-1) * B * T * C;
        dresidual = l == 0 ? grads_acts.encoded : grads_acts.residual3 + (l-1) * B * T * C;

        // get the pointers of the weights for this layer
        float* l_ln1w = params.ln1w + l * C;
        float* l_qkvw = params.qkvw + l * 3*C * C;
        float* l_attprojw = params.attprojw + l * C * C;
        float* l_ln2w = params.ln2w + l * C;
        float* l_fcw = params.fcw + l * 4*C * C;
        float* l_fcprojw = params.fcprojw + l * C * 4*C;
        // get the pointers of the gradients of the weights for this layer
        float* dl_ln1w = grads.ln1w + l * C;
        float* dl_ln1b = grads.ln1b + l * C;
        float* dl_qkvw = grads.qkvw + l * 3*C * C;
        float* dl_qkvb = grads.qkvb + l * 3*C;
        float* dl_attprojw = grads.attprojw + l * C * C;
        float* dl_attprojb = grads.attprojb + l * C;
        float* dl_ln2w = grads.ln2w + l * C;
        float* dl_ln2b = grads.ln2b + l * C;
        float* dl_fcw = grads.fcw + l * 4*C * C;
        float* dl_fcb = grads.fcb + l * 4*C;
        float* dl_fcprojw = grads.fcprojw + l * C * 4*C;
        float* dl_fcprojb = grads.fcprojb + l * C;
        // get the pointers of the activations for this layer
        float* l_ln1 = acts.ln1 + l * B * T * C;
        float* l_ln1_mean = acts.ln1_mean + l * B * T;
        float* l_ln1_rstd = acts.ln1_rstd + l * B * T;
        float* l_qkv = acts.qkv + l * B * T * 3*C;
        float* l_atty = acts.atty + l * B * T * C;
        float* l_att = acts.att + l * B * NH * T * T;
        float* l_residual2 = acts.residual2 + l * B * T * C;
        float* l_ln2 = acts.ln2 + l * B * T * C;
        float* l_ln2_mean = acts.ln2_mean + l * B * T;
        float* l_ln2_rstd = acts.ln2_rstd + l * B * T;
        float* l_fch = acts.fch + l * B * T * 4*C;
        float* l_fch_gelu = acts.fch_gelu + l * B * T * 4*C;
        // get the pointers of the gradients of the activations for this layer
        float* dl_ln1 = grads_acts.ln1 + l * B * T * C;
        float* dl_qkv = grads_acts.qkv + l * B * T * 3*C;
        float* dl_atty = grads_acts.atty + l * B * T * C;
        float* dl_preatt = grads_acts.preatt + l * B * NH * T * T;
        float* dl_att = grads_acts.att + l * B * NH * T * T;
        float* dl_attproj = grads_acts.attproj + l * B * T * C;
        float* dl_residual2 = grads_acts.residual2 + l * B * T * C;
        float* dl_ln2 = grads_acts.ln2 + l * B * T * C;
        float* dl_fch = grads_acts.fch + l * B * T * 4*C;
        float* dl_fch_gelu = grads_acts.fch_gelu + l * B * T * 4*C;
        float* dl_fcproj = grads_acts.fcproj + l * B * T * C;
        float* dl_residual3 = grads_acts.residual3 + l * B * T * C;

        // backprop this layer
        residual_backward(dl_residual2, dl_fcproj, dl_residual3, B*T*C);
        matmul_backward(dl_fch_gelu, dl_fcprojw, dl_fcprojb, dl_fcproj, l_fch_gelu, l_fcprojw, B, T, 4*C, C);
        gelu_backward(dl_fch, l_fch, dl_fch_gelu, B*T*4*C);
        matmul_backward(dl_ln2, dl_fcw, dl_fcb, dl_fch, l_ln2, l_fcw, B, T, C, 4*C);
        layernorm_backward(dl_residual2, dl_ln2w, dl_ln2b, dl_ln2, l_residual2, l_ln2w, l_ln2_mean, l_ln2_rstd, B, T, C);
        residual_backward(dresidual, dl_attproj, dl_residual2, B*T*C);
        matmul_backward(dl_atty, dl_attprojw, dl_attprojb, dl_attproj, l_atty, l_attprojw, B, T, C, C);
        attention_backward(dl_qkv, dl_preatt, dl_att, dl_atty, l_qkv, l_att, B, T, C, NH);
        matmul_backward(dl_ln1, dl_qkvw, dl_qkvb, dl_qkv, l_ln1, l_qkvw, B, T, C, 3*C);
        layernorm_backward(dresidual, dl_ln1w, dl_ln1b, dl_ln1, residual, l_ln1w, l_ln1_mean, l_ln1_rstd, B, T, C);
    }
    encoder_backward(grads.wte, grads.wpe, grads_acts.encoded, model->inputs, B, T, C);
}

void gpt2_update(GPT2 *model, float learning_rate, float beta1, float beta2, float eps, float weight_decay, int t) {
    // reference: https://pytorch.org/docs/stable/generated/torch.optim.AdamW.html

    // lazily allocate the memory for m_memory and v_memory
    if (model->m_memory == NULL) {
        model->m_memory = (float*)calloc(model->num_parameters, sizeof(float));
        model->v_memory = (float*)calloc(model->num_parameters, sizeof(float));
    }

    for (int i = 0; i < model->num_parameters; i++) {
        float param = model->params_memory[i];
        float grad = model->grads_memory[i];

        // update the first moment (momentum)
        float m = beta1 * model->m_memory[i] + (1.0f - beta1) * grad;
        // update the second moment (RMSprop)
        float v = beta2 * model->v_memory[i] + (1.0f - beta2) * grad * grad;
        // bias-correct both moments
        float m_hat = m / (1.0f - powf(beta1, t));
        float v_hat = v / (1.0f - powf(beta2, t));

        // update
        model->m_memory[i] = m;
        model->v_memory[i] = v;
        model->params_memory[i] -= learning_rate * (m_hat / (sqrtf(v_hat) + eps) + weight_decay * param);
    }
}

void gpt2_free(GPT2 *model) {
    free(model->params_memory);
    free(model->grads_memory);
    free(model->m_memory);
    free(model->v_memory);
    free(model->acts_memory);
    free(model->grads_acts_memory);
    free(model->inputs);
    free(model->targets);
}

#ifndef TESTING
// if we are TESTING (see test_gpt2.c), we'll skip the int main below

// ----------------------------------------------------------------------------
// data loader lite
// returns random batches of data from a file of integers

typedef struct {
    // hyperparameters
    int B; // batch size
    int T; // sequence length
    // input handling and its state
    FILE* tokens_file;
    long file_size;
    long current_position;
    // output memory
    int* batch;
    int* inputs;
    int* targets;
    // convenience variables
    int num_batches;
} DataLoader;

void dataloader_init(DataLoader *loader, char* filename, int B, int T) {
    loader->B = B;
    loader->T = T;

    // open the input file for reading
    loader->tokens_file = fopen(filename, "rb");
    if (loader->tokens_file == NULL) {
        printf("Error opening tokens file\n");
        exit(1);
    }

    // determine the file size
    fseek(loader->tokens_file, 0, SEEK_END);
    loader->file_size = ftell(loader->tokens_file);
    fseek(loader->tokens_file, 0, SEEK_SET);
    if (loader->file_size < (B * T + 1) * sizeof(int)) {
        printf("Error: file size is too small for the batch size and sequence length\n");
        exit(1);
    }
    loader->current_position = 0; // start at the beginning

    // allocate space for B*T + 1 integers to store the inputs and targets
    loader->batch = (int*) malloc((B * T + 1) * sizeof(int));
    loader->inputs = loader->batch;
    loader->targets = loader->batch + 1; // targets are shifted by one
    loader->num_batches = loader->file_size / (B * T * sizeof(int));
}

void dataloader_reset(DataLoader *loader) {
    loader->current_position = 0;
}

void dataloader_next_batch(DataLoader *loader) {
    int B = loader->B;
    int T = loader->T;
    // if we are at the end of the file, loop back to the beginning
    if (loader->current_position + (B*T+1) * sizeof(int) > loader->file_size) {
        loader->current_position = 0;
    }
    // read the B*T+1 integers from the file into batch
    fseek(loader->tokens_file, loader->current_position, SEEK_SET);
    fread(loader->batch, sizeof(int), B*T+1, loader->tokens_file);
    // advance the current position by B*T integers
    loader->current_position += B*T * sizeof(int);
}

void dataloader_free(DataLoader *loader) {
    fclose(loader->tokens_file);
    free(loader->batch);
}

// ----------------------------------------------------------------------------
// sampler

// the GPT-2 end-of-text token id
#define GPT2_EOT 50256

unsigned int random_u32(unsigned long long *state) {
    // xorshift rng: https://en.wikipedia.org/wiki/Xorshift#xorshift.2A
    *state ^= *state >> 12;
    *state ^= *state << 25;
    *state ^= *state >> 27;
    return (*state * 0x2545F4914F6CDD1Dull) >> 32;
}
float random_f32(unsigned long long *state) { // random float32 in [0,1)
    return (random_u32(state) >> 8) / 16777216.0f;
}

int sample_mult(float* probabilities, int n, float coin) {
    // sample index from probabilities (they must sum to 1!)
    // coin is a random number in [0, 1), usually from random_f32()
    float cdf = 0.0f;
    for (int i = 0; i < n; i++) {
        cdf += probabilities[i];
        if (coin < cdf) {
            return i;
        }
    }
    return n - 1; // in case of rounding errors
}

// ----------------------------------------------------------------------------
// Tokenizer (only supports decoding)

typedef struct {
    uint32_t vocab_size;
    char **token_table;
    int init_ok;
} Tokenizer;

void safe_printf(const char *piece) {
    // the tokens are raw bytes, and we we only want to print the printable ones
    // many bytes can be various control codes, backspace, etc.
    if (piece == NULL) { return; }
    if (piece[0] == '\0') { return; }
    // handle individual byte tokens
    // every token is asserted to be at least one byte so doing piece[1] is ok
    if (piece[1] == '\0') {
        unsigned char byte_val = piece[0];
        if (!(isprint(byte_val) || isspace(byte_val))) {
            return; // weird byte, don't print it
        }
    }
    printf("%s", piece);
}

void tokenizer_init(Tokenizer *tokenizer, const char *filename) {
    FILE *file = fopen(filename, "rb");
    if (file == NULL) {
        // try to be more helpful as we just added this feature, erase later
        printf("---\n");
        printf("WARNING: Failed to open the tokenizer file %s\n", filename);
        printf("The Tokenizer is a new feature added April 14 2024.\n");
        printf("Re-run `python train_gpt2.py` to write it\n");
        printf("---\n");
        tokenizer->init_ok = 0;
        return;
    }
    // read in the header
    uint32_t header[256];
    fread(header, sizeof(uint32_t), 256, file);
    assert(header[0] == 20240328);
    assert(header[1] == 1);
    tokenizer->vocab_size = header[2];
    // read in all the tokens
    unsigned char length;
    tokenizer->token_table = (char **)malloc(tokenizer->vocab_size * sizeof(char *));
    for (uint32_t i = 0; i < tokenizer->vocab_size; i++) {
        fread(&length, sizeof(unsigned char), 1, file);
        assert(length > 0); // every token should be at least one character
        char *token_bytes = (char *)malloc(length + 1);
        fread(token_bytes, sizeof(char), length, file);
        token_bytes[length] = '\0';  // Add null terminator for printing
        tokenizer->token_table[i] = token_bytes;
    }
    // cleanups
    fclose(file);
    tokenizer->init_ok = 1;
}

const char *tokenizer_decode(Tokenizer *tokenizer, uint32_t token_id) {
    if (tokenizer->init_ok == 0) {
        return NULL;
    }
    if (token_id < tokenizer->vocab_size) {
        return tokenizer->token_table[token_id];
    } else {
        printf("invalid token id %d!\n", token_id);
        return NULL;
    }
}

void tokenizer_free(Tokenizer *tokenizer) {
    if (tokenizer->init_ok) {
        for (uint32_t i = 0; i < tokenizer->vocab_size; i++) {
            free(tokenizer->token_table[i]);
        }
        free(tokenizer->token_table);
    }
}

// ----------------------------------------------------------------------------
// main training loop
int main() {

    // build the GPT-2 model from a checkpoint
    GPT2 model;
    gpt2_build_from_checkpoint(&model, "gpt2_124M.bin");

    // build the DataLoaders from tokens files. for now use tiny_shakespeare if available, else tiny_stories
    char* tiny_stories_train = "data/TinyStories_train.bin";
    char* tiny_stories_val = "data/TinyStories_val.bin";
    char* tiny_shakespeare_train = "data/tiny_shakespeare_train.bin";
    char* tiny_shakespeare_val = "data/tiny_shakespeare_val.bin";
    char* train_tokens = access(tiny_shakespeare_train, F_OK) != -1 ? tiny_shakespeare_train : tiny_stories_train;
    char* val_tokens = access(tiny_shakespeare_val, F_OK) != -1 ? tiny_shakespeare_val : tiny_stories_val;
    int B = 4; // batch size 4 (i.e. 4 independent token sequences will be trained on)
    int T = 64; // sequence length 64 (i.e. each sequence is 64 tokens long). must be <= maxT, which is 1024 for GPT-2
    DataLoader train_loader;
    dataloader_init(&train_loader, train_tokens, B, T);
    printf("train dataset num_batches: %d\n", train_loader.num_batches);
    DataLoader val_loader;
    dataloader_init(&val_loader, val_tokens, B, T);
    printf("val dataset num_batches: %d\n", val_loader.num_batches);
    int val_num_batches = 10;

    // build the Tokenizer
    Tokenizer tokenizer;
    tokenizer_init(&tokenizer, "gpt2_tokenizer.bin");

    // some memory for generating samples from the model
    unsigned long long rng_state = 1337;
    int* gen_tokens = (int*)malloc(B * T * sizeof(int));
    const int genT = 64; // number of steps of inference we will do

    // train
    struct timespec start, end;
    for (int step = 0; step <= 40; step++) {

        // once in a while estimate the validation loss
        if (step % 10 == 0) {
            float val_loss = 0.0f;
            dataloader_reset(&val_loader);
            for (int i = 0; i < val_num_batches; i++) {
                dataloader_next_batch(&val_loader);
                gpt2_forward(&model, val_loader.inputs, val_loader.targets, B, T);
                val_loss += model.mean_loss;
            }
            val_loss /= val_num_batches;
            printf("val loss %f\n", val_loss);
        }

        // once in a while do model inference to print generated text
        if (step > 0 && step % 20 == 0) {
            // fill up gen_tokens with the GPT2_EOT, which kicks off the generation
            for(int i = 0; i < B * T; ++i) {
                gen_tokens[i] = GPT2_EOT;
            }
            // now sample from the model autoregressively
            printf("generating:\n---\n");
            for (int t = 1; t < genT; t++) {
                // note that inference is very wasteful here because for each token
                // we re-calculate the forward pass for all of (B,T) positions from scratch
                // but the inference here is just for sanity checking anyway
                // and we can maybe optimize a bit more later, with careful tests
                gpt2_forward(&model, gen_tokens, NULL, B, T);
                // furthermore, below we're only using b=0 (i.e. the first row) of all B rows
                // we're in principle running B "inference streams" in parallel here
                // but only using position 0
                // get the V-dimensional vector probs[0, t-1, :]
                float* probs = model.acts.probs + (t-1) * model.config.vocab_size;
                float coin = random_f32(&rng_state);
                int next_token = sample_mult(probs, model.config.vocab_size, coin);
                gen_tokens[t] = next_token;
                // print the generated token, either using the Tokenizer or a fallback
                if (tokenizer.init_ok) {
                    const char* token_str = tokenizer_decode(&tokenizer, next_token);
                    safe_printf(token_str);
                } else {
                    // fall back to printing the token id
                    printf("%d ", next_token);
                }
                fflush(stdout);
            }
            printf("\n---\n");
        }

        // do a training step
        clock_gettime(CLOCK_MONOTONIC, &start);
        dataloader_next_batch(&train_loader);
        gpt2_forward(&model, train_loader.inputs, train_loader.targets, B, T);
        gpt2_zero_grad(&model);
        gpt2_backward(&model);
        gpt2_update(&model, 1e-4f, 0.9f, 0.999f, 1e-8f, 0.0f, step+1);
        clock_gettime(CLOCK_MONOTONIC, &end);
        double time_elapsed_s = (end.tv_sec - start.tv_sec) + (end.tv_nsec - start.tv_nsec) / 1e9;
        printf("step %d: train loss %f (took %f ms)\n", step, model.mean_loss, time_elapsed_s * 1000);
    }

    // free
    dataloader_free(&train_loader);
    dataloader_free(&val_loader);
    tokenizer_free(&tokenizer);
    gpt2_free(&model);
    free(gen_tokens);
    return 0;
}
#endif