t_case9mod_opf.m

function [baseMVA, bus, gen, branch, areas, gencost]  = t_case9mod_opf
%T_CASE9MOD_OPF    Power flow data for 9 bus, 3 generator case, with OPF data.
%   This is the same as t_case9_opf except for a line-flow limit of 100 MVA
%   rather than 40 MVA for the line between buses 6 and 7. This less strict
%   line-flow limit results in an exact semidefinite relaxation for this
%   problem. Also all lines have minimum resistances of 1e-4 per unit.
%   Please see CASEFORMAT for details on the case file format.

%% MATPOWER Case Format : Version 1

%%-----  Power Flow Data  -----%%
%% system MVA base
baseMVA = 100;

%% bus data
%	bus_i	type	Pd	Qd	Gs	Bs	area	Vm	Va	baseKV	zone	Vmax	Vmin
bus = [
	1	3	0	0	0	0	1	1	0	345	1	1.1	0.9;
	2	2	0	0	0	0	1	1	0	345	1	1.1	0.9;
	30	2	0	0	0	0	1	1	0	345	1	1.1	0.9;
	4	1	0	0	0	0	1	1	0	345	1	1.1	0.9;
	5	1	90	30	0	0	1	1	0	345	1	1.1	0.9;
	6	1	0	0	0	0	1	1	0	345	1	1.1	0.9;
	7	1	100	35	0	0	1	1	0	345	1	1.1	0.9;
	8	1	0	0	0	0	1	1	0	345	1	1.1	0.9;
	9	1	125	50	0	0	1	1	0	345	1	1.1	0.9;
];

%% generator data
%	bus	Pg	Qg	Qmax	Qmin	Vg	mBase	status	Pmax	Pmin
gen = [
	1	0	0	300	-300	1	100	1	250	90;
	2	163	0	300	-300	1	100	1	300	10;
	30	85	0	300	-300	1	100	1	270	10;
];

%% branch data
%	fbus	tbus	r	x	b	rateA	rateB	rateC	ratio	angle	status
branch = [
	1	4	0.0001	0.0576	0	0	250	250	0	0	1;
	4	5	0.0170	0.0920	0.158	0	250	250	0	0	1;
	5	6	0.0390	0.1700	0.358	150	150	150	0	0	1;
	30	6	0.0001	0.0586	0	0	300	300	0	0	1;
	6	7	0.0119	0.1008	0.209	100	150	150	0	0	1;
	7	8	0.0085	0.0720	0.149	250	250	250	0	0	1;
	8	2	0.0001	0.0625	0	250	250	250	0	0	1;
	8	9	0.0320	0.1610	0.306	250	250	250	0	0	1;
	9	4	0.0100	0.0850	0.176	250	250	250	0	0	1;
];

%%-----  OPF Data  -----%%
%% area data
%	area	refbus
areas = [
	1	5;
];

%% generator cost data
%	1	startup	shutdown	n	x1	y1	...	xn	yn
%	2	startup	shutdown	n	c(n-1)	...	c0
gencost = [
	1	0	0	4	0	0	100	2500	200	5500	250	7250;
	2	0	0	2	24.035	-403.5	0	0	0	0	0	0;
	1	0	0	3	0	0	200	3000	300	5000	0	0;
];